Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
Tel : +86-17362202101 Email：sales09@zxjtsteel.com
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
S500QL under EN 10025-6 owned the minimum yield strength at 500 Mpa and tensile strength within 590-770 Mpa. S500QL steel plate,Titanium microalloying is an element of strengthening complex with carbon and nitrogen. S500QL steel plates are mainly chose by end users to manufacture the machiney equipments,such as drilling machine,excavator,grab,conweigh belt and so on
High yield strength steel plate S500QL under EN 10025-6 owned the minimum yield strength at 500 Mpa and tensile strength within 590-770 Mpa.The necessary technical requirement when rolling steel plate S500QL contains quenching and tempering heat treatment,low temperature impacting test under minus 40 centigrade.The additional technical has Ultrasonic examination.
A709 Grade 50S steel plate A709 Grade 50S steel grade is a high strength low alloy structural carbon steel used in building bridge projects. Compare A709 Gr.100, and A709 Gr.50w grade, A709 Gr.50S has a lowest yield strength in 345Mpa in usual. A 709 Gr.50S requests killed or semi-killed in manufacture.
EN10113 S275M is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S275M steel plate/sheet belongs to thermomechanical rolled weldable fine grain structural steels.
S500Q high strength steel plate S500Q steel is a kind of high yield strength quenched and Tempered structural steel material. The delivery condition for S500Q must be Q+T (quenched and Tempered). S500Q steel plates also have -20 degree low temperature impact test.
ASTM A514 is most commonly used as structural steel in cranes and large heavy-load machines. A514 is a particular type of high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).
ASTM A514 standard specification for pressure vessel plates, carbon steel, for intermediate-and higher-temperature service. ASTM A514 grade Q plates shall be normalized. A514 Grade Q is for high yield strength, quenched and tempered alloy steel plate of structural quality in thickness of 150mm and under intended primarily for use in welded bridges and other structures. Gnee steel is specialized in supplying ASTM A514 steel plate in A514 grade Q.
EN 10025-4 S420ML,S420ML steel plate Gnee steel is specialized in supplying EN10025-4 steel plate in S420ML. For more information of S420ML steel plates, please check them in following: Chemical composition % of the Product analysis of grade S420ML (1.8836)
S355K2 steel plate S355K2 is a low carbon, high tensile strength structural steel which can be readily welded to other weldable steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.
PROVIDE YOU WITH FREE SOLUTIONS
CONTACT US
Tel : +86-17362202101
Email：sales09@zxjtsteel.com
WhatsApp : +86-17362202101
Address：Block A, West Jin Times Central Square, Huaiyin District, Jinan City, Shandong Province
