A240 317LMN stainless steel sheet

Alloy 317LMN (UNS S31726) is an austenitic chromium-nickel-molybdenum stainless steel with corrosion resistance superior to 316L and 317L. The higher molybdenum content, combined with an addition of nitrogen,

Hot Rolled / Cold Rolled 201/301/304/316 Stainless Steel

200Series –201,202,204,205 300Series –301,302,303,304,304L,304H,316,316L,309S,310S, 321, 400Series – 410(1Cr13),420(2Cr13),430(1Cr17)Etc. Shape: Round, Hex square, angle, flat, Square Standard: ASTM, EN10272, JIS4303, JIS G-4311,AISI,GB

309 Stainless Steel Wire Mesh

Type 309 stainless steel wire mesh is a heat resistant alloy useful in temperatures up to 1700°F. When higher operating temperatures are required, higher nickel alloys (i.e. see SS310, SS330, Inconel® 600, Incoloy® 800) are used in place of Type 309 stainless steel. Given its high chromium (~23%) and nickel (~12%) composition, T-309 stainless steel is highly corrosion resistant, has excellent resistance to oxidation, has outstanding heat resistance, and provides good strength at both room and elevated temperatures.

316 316L Stainless Steel Sheet

Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.

416HT Stainless Steel Sheet

Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels.

409 Stainless Steel Sheet

Alloy 409 is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary application is automotive exhaust systems. It contains 11% chromium which is the minimum amount for the formation of the passive surface film which gives stainless steels their corrosion resistance.

Stainless steel 430,430F

Stainless steel 430 is a non-hardenable steel containing straight chromium, and belongs to the ferritic group of steels.

Stainless steel 409

409 stainless steel is a Ferritic steel that offers good mechanical properties and high-temperature corrosion resistance. It is commonly considered as a chromium stainless steel, with applications in exhaust systems of automobiles and applications that demand weldability.

Stainless steel 201

201 Stainless steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304.

< 1234...8 >




Tel : +86-15508683101
WhatsApp : +86-15508683101
Address:Block A, West Jin Times Central Square, Huaiyin District, Jinan City, Shandong Province