Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
Tel : +86-15508683101 Email：qiaobing@zxjtsteel.com
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel.
Q345B Carbon Structural Steel Plate Stockist, CR Q345B Equal Width Steel Angle Supplier, GB/T1591 Q345B Carbon Steel Coil, Q345B HR Steel Coils, Q345B Steel Plate, Standard GB T 1591-94 Steel Round Bars.
45# is a grade of steel, a high-quality carbon structural steel, corresponding to Japanese standard S45C, American standard: 1045, and German standard C45. Its characteristic is that it has higher strength and resistance to deformation than ordinary A3 steel.
The high-quality carbon structural steel of No. 35 steel (GB/T699-2015) has good plasticity and appropriate strength, good process performance, and acceptable welding performance. It is mostly used in normalized and quenched and tempered states.
Angle bar can be divided into equal Angle and unequal Angle, among which unequal Angle can be divided into unequal thickness and unequal thickness
Q345D HR Steel Coils, CR Q345D Equal Width Steel Angle Supplier, Q345D Steel Plate, Standard GB T 1591-94 Steel Round Bars, GB/T1591 Q345D Carbon Steel Coil, Q345D Carbon Structural Steel Plate Stockist.
A36 hot rolled steel c channels, also referred to as “American Standard Channels”, are an excellent candidate for most processing techniques. A36 hot rolled steel channels have a rough, blue-grey finish. A36 material is a low carbon steel mild steel which is long lasting and durable. Hot rolled C channels have a “structural shape” meaning at least one dimension (excluding length) is greater than 3 inches. C channels inside flange surface have approximately a 16-2/3% slope, which distinguishes them from “MC” channels. Common applications include structural support, trailers, and other architectural uses. ASTM A36 / A36M-08 is the standard specification for carbon structural steel.
ASTM A36 Steel Channel - Galvanized or Primed. ASTM A36 steel channel is hot-rolled, low carbon steel section with good properties including welding, machinability and ductility.
Angle steel, commonly known as angle iron, is a long steel with two sides perpendicular to each other. There are equal angle steel and unequal angle steel.The width of two sides of an equal angle steel is equal. The specification is expressed in mm of side width × side width × side thickness. Such as "∟ 30 × 30 × 3", that is to say, equal angle steel with side width of 30mm and side thickness of 3mm. It can also be expressed by model. The model is the centimeter of the side width, such as ∟ 3 × 3. The model does not represent the dimensions of different edge thicknesses in the same model, so the edge width and edge thickness dimensions of angle steel shall be filled in completely in the contract and other documents to avoid using the model alone. The specification of hot rolled equal leg angle steel is 2 × 3-20 × 3.
PROVIDE YOU WITH FREE SOLUTIONS
CONTACT US
Tel : +86-15508683101
Email：qiaobing@zxjtsteel.com
WhatsApp : +86-15508683101
Address：Block A, West Jin Times Central Square, Huaiyin District, Jinan City, Shandong Province
