Welcome to Zhongxin Iron and Steel (Shandong) Group Co., Ltd.
Tel : +86-17362202101 Email：sales09@zxjtsteel.com
PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
Type 309 stainless steel wire mesh is a heat resistant alloy useful in temperatures up to 1700°F. When higher operating temperatures are required, higher nickel alloys (i.e. see SS310, SS330, Inconel® 600, Incoloy® 800) are used in place of Type 309 stainless steel. Given its high chromium (~23%) and nickel (~12%) composition, T-309 stainless steel is highly corrosion resistant, has excellent resistance to oxidation, has outstanding heat resistance, and provides good strength at both room and elevated temperatures.
316 316L Stainless Steel Sheet
Alloys 316 (UNS S31600) and 316L (UNS S31603) are molybdenum-bearing austenitic stainless steels, which are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Alloy 304. These alloys also offer higher creep, stress-to-rupture, and tensile strength at elevated temperatures. In addition to excellent corrosion resistance and strength properties, the Alloys 316 and 316L Cr-Ni-Mo alloys also provide excellent fabricability and formability which are typical of the austenitic stainless steels.
Stainless steel 310S is austenitic chromium, nickel stainless steel (.08% max carbon) with good oxidation resistance and strength at high temperatures. It resist oxidation in continuous service up to 2000ºF gave decreasing sulphur gasses are not present. It is additionally utilized for intermittent service at temperatures up to 1900°F due to it resists rescaling and has a low coefficient of expansion. This factor reduces the tendency of the steel to warp in heat service. 310s are same as 310 aside from lower carbon content to minimize carbide precipitation during welding.
US 309/309S (UNS S30900/S30908) steel
TYPES 309 AND 309S are austenitic chromium-nickel stainless steels that provide excellent corrosion resistance and heat resistance plus good strength at room and elevated temperatures. Type 309S is identical to Type 309 except for a lower carbon content that minimizes carbide precipitation and improves weldability.
AISI/SUS 309 STAINLESS STEEL COIL/SHEET
Resistance of corrosion for AISI/SUS 309 stainless is excellent,Type 309's content of carbon is higher than Type 309S.This material is mainly used in furnace parts,heating elements,boiler baffles,chemical processing equipment,etc.
Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels.
Stainless Steel Material 17-4PH
17-4 PH Steel contains 4% copper and may be hardened by a single low temperature precipitation hardening heat treatment, producing excellent mechanical properties at a high strength level. 17-4 PH provides this high strength in combination with good mechanical properties at temperatures of up to 600°F (316°C).
Alloy 409 is a general purpose, chromium, titanium stabilized, ferritic stainless steel whose primary application is automotive exhaust systems. It contains 11% chromium which is the minimum amount for the formation of the passive surface film which gives stainless steels their corrosion resistance.
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel.
PROVIDE YOU WITH FREE SOLUTIONS
CONTACT US
Tel : +86-17362202101
Email：sales09@zxjtsteel.com
WhatsApp : +86-17362202101
Address：Block A, West Jin Times Central Square, Huaiyin District, Jinan City, Shandong Province
